Shop | Directional drilling parts

Filtern nach

- Alle
- Housing
- DUB WISE PULLER (SLEEVED) DUCT
- Trihawk heads
- Drive chucks
- 125 LPT
- 125 LPT with teeth
- 625 LPT
- 625 LPT with teeth
- for JT100
- for JT1220M1
- for JT1220M1 with teeth
- for JT2020M1
- for JT2020M1 with teeth
- for JT2720 EZ1
- for JT2720M1
- for JT2720M1 with teeth
- for JT3020M1
- for JT3020M1 with teeth
- for JT4020M1
- for JT4020M1 with teeth
- for JT5
- for JT60
- for JT922
- for JT922 with teeth
- QF#300/JT9 Hawkeye
- QF#300/JT9 Hawkeye with teeth
- QF#400/JT20 Hawkeye
- QF#400/JT20 Hawkeye with teeth
- QF#460/JT30 Hawkeye
- QF#460/JT30 Hawkeye with teeth
- API thread
- Slice
- 110mm
- 110mm cone
- 115mm with 5t swivel - 2 3/8R
- 115mm with 5t swivel - 2 IF
- 125mm
- 130mm with 5t swivel - 2 3/8R
- 130mm with 8t swivel - 2 3/8R
- 140mm
- 140mm cone
- 150mm with 12t swivel - 2 3/8R
- 150mm with 5t swivel - 2 3/8R
- 150mm with 5t swivel - 2 IF
- 150mm with 8t swivel - 2 7/8R
- 150mm with 8t swivel - 2 3/8R
- 160mm
- 160mm cone
- 165mm with 12t swivel - 2 3/8R
- 165mm with 5t swivel - 2 IF
- 165mm with 5t swivel - 2 3/8R
- 180mm
- 180mm cone
- 200mm
- 200mm cone
- 200mm with 12t swivel - 2 3/8R
- 200mm with 18t swivel - 2 3/8R
- 200mm with 5t swivel - 2 IF
- 200mm with 8t swivel - 2 3/8R
- 200mm/12t 2 3/8R
- 200mm/18t 2 7/8R
- 225mm
- 225mm cone
- 250mm
- 250mm 2 3/8R box/box
- 250mm cone
- 250mm with 12t 2 3/8R
- 250mm with 12t swivel - 2 3/8R
- 250mm with 18t swivel - 2 3/8R
- 250mm with 4 segments IADC 537 6 1/2”; 2 7/8R box
- 250mm with 5t swivel - 2 IF
- 250mm with 8t 2 3/8R
- 250mm/12t 2 7/8R
- 250mm/18t 2 7/8R
- 280mm
- 300mm 2 3/8R box/box
- 300mm with 12t swivel - 2 3/8R
- 300mm with 12t 2 3/8R
- 300mm with 18t swivel - 2 3/8R
- 300mm with 4 segments IADC 537 7 7/8”; 2 7/8R box/
- 300mm with 8t 2 3/8R
- 300mm/12t 2 7/8R
- 300mm/18t 2 7/8R
- 315mm
- 32mm
- 32mm cone
- 350mm 2 7/8R box/box
- 350mm with 12t 2 7/8R
- 350mm with 4 segments IADC 537 7 7/8”; 2 7/8R box/
- 350mm with 8t 2 7/8R
- 350mm/12t 2 7/8R
- 350mm/18t 2 7/8R
- 355mm
- 355mm cone
- 400/230 with 5 segments IADC 537 7 7/8" 2 7/8R bo
- 400mm
- 400mm 2 7/8R box/box
- 400mm with 12t 2 7/8R
- 400mm with 18t 2 7/8R
- 400mm with 24t 2 7/8R
- 400mm/18t 2 7/8R
- 400mm/24t 2 7/8R
- 40mm
- 40mm cone
- 450mm 2 7/8R box/box
- 450mm with 12t 2 7/8R
- 450mm with 18t 2 7/8R
- 450mm with 24t 2 7/8R
- 450mm/18t 2 7/8R
- 450mm/24t 2 7/8R
- 500mm 2 7/8R box/box
- 500mm with 18t 2 7/8R
- 500mm with 24t 2 7/8R
- 500mm/18t 2 7/8R
- 500mm/24t 2 7/8R
- 50mm
- 50mm cone
- 63mm
- 63mm cone
- 75mm
- 75mm cone
- 90mm
- 90mm cone
- 90mm with 5t swivel - 2IF
- Rock bit 12-1/4” (311.1 mm) IADC 135; Connection:
- Rock bit 3” (76.2 mm) IADC 211 Connection: N-rod
- Rock bit 5-1/2” (139.7 mm) IADC 537; Connection 2-
- Rock bit 8-1/2” (215.9 mm) IADC 537; Connection 4-
- Rock bit 9-7/8” (250.8 mm) IADC 117; connection 6-
- stacked 300mm with 12t swivel - 2 3/8R
- stacked 300mm with 18t swivel - 2 7/8R
- stacked 350mm with 12t swivel - 2 7/8R
- stacked 350mm with 18t swivel - 2 7/8R
- stacked 400mm with 12t swivel - 2 7/8R
- stacked 400mm with 18t swivel - 2 7/8R
- stacked 450mm with 18t swivel - 2 7/8R
- stacked 450mm with 24t swivel - 2 7/8R
- stacked 500mm with 18t swivel - 2 7/8R
- stacked 500mm with 24t swivel - 2 7/8R
- Vertical drill head 120mm 3 wing 2 3/8R
- Vertical drill head 140mm 3 wing 2 3/8R
- Vertical drill head 150mm 3 wing 2 3/8R
- Vertical drill head 150mm 3 wing 2 7/8R
- Vertical drill head 150mm 3 wing 3 1/2R
- Vertical drill head 170mm 3 wing 2 3/8R
- Vertical drill head 170mm 4 wing 3 1/2R
- Vertical drill head 200mm 5 wing 4 1/2R
- Vertical drill head 220mm 5 wing 4 1/2R
- Vertical drill head 300mm 5 wing 4 1/2R
- Vertical drill head 320mm 5 wing 4 1/2R
- 125 LPT - 2 3/8R
- 125 LPT - 2 7/8R
- 125 LPT - 2 IF
- 12t puller (OD 98mm; ED 27mm)
- 12t swivel repair set (OD 122mm)
- 12t weld in swivel
- 18t puller (OD 108mm; ED 27mm)
- 18t swivel repair set (OD 134mm)
- 18t weld in swivel
- 24t puller (OD 138mm; ED 35mm)
- 24t swivel repair set (OD 155mm)
- 24t weld in swivel
- 30t puller (OD 146mm; ED 40mm)
- 30t swivel repair set (OD 170mm)
- 30t weld in swivel
- 36t puller (OD 156mm; ED 51mm)
- 36t swivel repair set (OD 180mm)
- 36t weld in swivel
- 50t puller tab/fork
- 50t swivel repair set
- 50t weld in swivel
- 5t puller (OD 69mm; ED 22mm)
- 5t puller (OD 69mm; ED 22mm) bolt for steering pl
- 5t swivel repair set (OD 88mm)
- 5t weld in swivel
- 625 LPT - 2 7/8R
- 625LPT - 2 3/8R
- 8t puller (OD 89mm; ED 24mm)
- 8t swivel repair set (OD 104mm)
- 8t weld in swivel
- AT30 Hawk 390
- D10x15 body 200mm
- D16 #250 - 1.625 LPT
- D16 #250 - 2.125 LPT
- D16 #250 - QF#400
- D16 S1 #250 body 160mm
- D16 S1 #250 body 95mm
- D16 S2 #600 - #250 body 260mm
- D20 #400 - 2.125 LPT
- D20 #400 - QF#400
- D20 #400 body 160mm
- D20 S2 #600 - #400 body 260mm
- D23 S3 #600 body 254 mm
- D24 #600 - 2.125 LPT
- D24 #600 - QF#460
- D24#600 - QF#400
- D24/40 S1 #600 body 180mm
- D24/40 S2 #600 body 240mm
- D33 FS2 #602 - 2.125 LPT
- D33 FS2 #602 - QF#400
- D33 FS2 #602 - QF#460
- D33/44 FS2 #602 body 215mm
- D36 #650 - 2.125 LPT
- D36 #650 - QF#400
- D36 #650 - QF#460
- D36/50 FS1 #650 body 200mm
- D36/50 S2 FS1 #700 body 215mm
- D36II #700 - 2.125 LPT
- D36S2 #700 box - QF#460
- D50/100 #800 body 180mm
- D7 #200 - 1.625 LPT
- D7 #200 - QF#300
- D7/11 S1 #200 body 135mm
- D9/13 S2 #250 - #200 body 200mm
- EZ 1.31-6 EZ2 - 2 3/8R
- EZ 1.31-6 EZ2 - 2IF
- EZ 1.31-6 EZ2 - JT5 pin
- EZ 1.625LPT - 2IF
- EZ 1.63-6 EZ2 box - 2 3/8R
- EZ 1.63-6 EZ2 box- 2IF
- EZ 1.88-6 EZ3 box - 2 3/8R
- EZ 1.88-6 EZ3 box - 2 IF
- EZ 2.00-6 EZ2 box - 1.94-4 pin
- EZ 2.00-6 EZ2 box - 2 3/8R
- EZ 2.00-6 EZ2 box - 2 7/8R
- EZ 2.00-6 EZ2 box - 2 IF
- EZ 2.25-6 EZ2 box - 2 3/8R
- EZ 2.25-6 EZ2 box - 2 7/8R
- EZ 2.25-6 EZ3 box - 2 3/8R
- EZ 2.25-6 EZ3 box - 2 7/8R
- EZ 2.63-6 EZ2 box - 2 3/8R
- EZ 2.63-6 EZ2 box - 2 7/8R
- EZ 2.63-6 EZ2 box - 3 1/2R
- EZ JT20 Hawk 350 - 2 3/8R
- EZ JT20 Hawk 350 - 2 7/8R
- EZ JT20 Hawk 350 - 2IF
- EZ JT30 Hawk 390 - 2 3/8R
- EZ JT30 Hawk 390 - 2 7/8R
- EZ JT9 Hawk 275 - 2 3/8R
- EZ JT9 Hawk 275- 2IF
- EZ QF#300 - 2 3/8R
- EZ QF#300 - 2 IF
- EZ QF#300 - 2-4 Acme pin
- EZ QF#400 - 2 3/8R
- EZ QF#400 - 2 7/8R
- EZ QF#460 - 2 3/8R
- EZ QF#460 - 2 7/8R
- for Ditch Witch JT1720
- for Ditch Witch JT2020M1
- for Ditch Witch JT2720M1 body 178mm
- for Ditch Witch JT3020M1
- for Ditch Witch JT4020M1 body 440mm
- for Ditch Witch JT5
- for Ditch Witch JT520
- for Ditch Witch JT920
- for Ditch Witch JT922M1
- for Ditch Witch JT922M1 - D7 #200box
- for Vermeer D16 #250
- for Vermeer D20 #400
- for Vermeer D24 #600
- for Vermeer D33/44 FS2 #602
- for Vermeer D36/50 FS1 #650
- for Vermeer D36/50 S2 FS1 #700
- for Vermeer D50/100 3 1/2FS1 #800
- for Vermeer D7 #200
- JT1220M1 (1.47M with 1.88M EZ3)
- JT1720M1 (1.69M with 2.0M EZ2)
- JT20 Hawk 350
- JT2020M1 (1.94-4)
- JT2720M1 (2.11M with 2.25M EZ2)
- JT2720M1 body 314mm
- JT30 Hawk 390
- JT3020M1 1155mm (2.11M with 2.25M EZ3)
- JT3020M1 960mm (2.11M with 2.25M EZ3)
- JT3020M1 body 350mm
- JT4020M1 1155mm (2.59M with 2.63M EZ2)
- JT4020M1 body 200mm
- JT5 (1.10M with 1.31M EZ2)
- JT520 (1.21M with 1.31M EZ2)
- JT9 Hawk 275
- JT920
- JT922M1
- JT922M1-D7#200 pin
- for D20 carbide inserts 100mm
- for D20 sand bit 100mm
- for D24 carbide inserts 115mm
- for D24 sand bit 115mm
- for D36 carbide inserts 125mm
- for D36 sand bit 125mm
- for D7 carbide inserts 85mm
- for D7 sand bit 85mm
- for JT20 sand bit 100mm
- for JT20 sand bit 115mm
- for JT20 with 20mm teeth 115mm
- for JT20 with 20mm teeth 125mm
- for JT30 sand bit 125mm
- for JT30 with 20mm teeth 115mm
- for JT30 with 20mm teeth 125mm
- for JT30 with 20mm teeth 140mm
- for JT9 sand bit 85mm
- for JT9 with 20mm teeth 85mm
- for Vermeer D20 with 20mm teeth 100mm
- for Vermeer D24 with 20mm teeth 115mm
- for Vermeer D36 with 20mm teeth 125mm
- for Vermeer D7 with 20mm teeth 85mm
- JT20 carbide inserts 100mm
- JT20 steep taper tuff 100mm
- JT20 steep taper tuff 115mm
- JT20 steep taper tuff 125mm
- JT20 with 20mm teeth 100mm
- JT30 carbide inserts 125mm
- JT30 steep taper tuff 115mm
- JT30 steep taper tuff 125mm
- JT30 super steep taper tuff 125mm
- JT5 with carbide inserts 65mm
- JT5 with carbide inserts 75mm
- JT9 carbide inserts 85mm
- JT9 steep taper tuff 85mm special hole
- Vermeer D20 - 100 mm
- Vermeer D24 - 115 mm
- Vermeer D36 - 125 mm
- Vermeer D36 super steep - 125 mm

HOME PAGE >